DPH: Asbestos Related Notification Fees

Asbestos Related Notification Fees

Fees must be submitted with asbestos abatement notification and proposed alternative work practices. A fee shall also be assessed for each reinspection concerning an asbestos abatement activity determined to be in non-compliance with asbestos regulation. The fee schedule is as follows:  

ASBESTOS ABATEMENT ACTIVITY Fees
1. Notification of abatement less than 160 square feet
$100.00
2. Notification of abatement involving 160 square feet or greater
$100.00 plus one percent of the total abatement cost (excluding reinsulation) up to a maximum of $5,000.00
3. Asbestos Alternative Work Practice Reviews $200.00
4. Compliance Reinspections $100.00


SUBMISSION OF NOTIFICATIONS
Asbestos Abatement Notification will not be accepted via fax transmission due to the requirement for the notification fee. All notifications must be submitted on the prescribed form. Notifications received on individual company formats will be considered invalid and returned.
Asbestos Abatement Notification Form  Microsoft Word.doc | Adobe.pdf
A revised asbestos abatement notification form has been developed to reflect the new fee submission requirements.

POLICY CONCERNING ASBESTOS ABATEMENT REVISIONS

If the amount of asbestos to be abated as indicated on the originally submitted notification is increased such that the total amount of asbestos will equal or exceed one hundred sixty (160) square feet, a revised notification must be submitted with payment of one percent of the total abatement cost.

If the amount of asbestos to be abated as indicated on the originally submitted notification equalled or exceeded one-hundred-sixty (160) square feet, a revised notification with an additional fee for one percent of the increased abatement cost up to a maximum fee of $5,000 must be submitted.


METHOD OF PAYMENT

No cash fees will be accepted.

All checks should be made payable to the "Treasurer, State of Connecticut".

If you should have any question concerning the asbestos fee requirement, please feel free to call our office at (860) 509-7367.

Notification Conversion Table

     Outside insulation pipe diameter (in inches) multiplied by linear feet of pipe.         

     

Pipe Diameter

Conversion Factor

Pipe Diameter

Conversion Factor

.26

19”

4.98

.52

20”

5.24

.79

21”

5.50

1.05

22”

5.76

1.31

23”

6.02

1.57

24”

6.29

1.83

25”

6.55

2.10

26”

6.80

2.46

27”

7.06

10”

2.62

28”

7.32

11”

2.88

29”

7.59

12”

3.14

30”

7.85

13”

3.40

31”

8.11

14”

3.66

32”

8.38

15”

3.93

33”

8.64

16”

4.19

34”

8.90

17”

4.45

35”

9.16

18”

4.72

36”

9.43

Note: To obtain square feet from linear feet, you must take the amount of linear feet and multiply it by the conversion factor for the pipe diameter. The end result is square feet.  The diameter is based on the outside diameter with insulation.

Example: 35 linear feet of 3" diameter pipe.

  1. The conversion factor for 3" pipe is .79
  2. Take 35 linear feet X .79 = 27.65 square feet.
  




Content Last Modified on 10/17/2012 12:39:07 PM