DEEP: Air Permitting Assistance

Air Permitting Assistance
 
{photo of road sign with phone number}
 
Request a Pre-Application or Application Review Meeting
We strongly encourage you to meet with a CT DEEP permit engineer early in your project planning and prior to submitting an air permit application to facilitate the processing of your permit application.  A permit engineer will help you identify relevant permitting issues including permitting options, necessary forms, expectations, and timeframes.
 
Please visit our Pre-Application and Application Review Meeting Webpage for more information and how to request one of these helpful meetings.
 
Permitting Application Status
   top
 
 
Permitting Support
General Permitting Support
BACT/LAER Review Support
 
Other Helpful Links
CTDEEP Air Technical Support Webpage - Air Modeling and Monitoring Support
   top
 
 
Permitting Tools
 
{Air Permitting Wizard Screenshot}
This interactive questionnaire will help you determine the permit applicability for a new air pollution emissions source by answering a series of questions related to that source.  This questionnaire currently covers RCSA Sections 22a-174-3a, -3b, -3c and -42.
{CT BACT Database Screenshot}
CT BACT Database (.zip, MS Access 2007)
Updated on August 4, 2015
 
The CT BACT Database allows you to search all recent major source and minor source BACT determinations made in CT to aid in the preparation of a BACT Determination for an application. 
 
NOTE: If you do not have the full version of Microsoft Access 2007 installed on your computer, you can download and install the free Microsoft Office Access 2007 Runtime that will allow you to open and run the database.
{Radius Tool Screenshot}
DEEP Air Inventory Radius Search Tool (.zip, MS Access 2007) 
 
The DEEP Air Inventory Radius Search Tool allows you to enter a geographic location (“centroid”) in UTM format, and a radius in kilometers, and retrieve a list of inventoried point sources within that radius to aid in the preparation of a modeling analysis for an application.
 
The tool was upgraded to version 2.3 in September 2015 and allows the user to select a save location for the MSExcel output.  PDF output is no longer generated. 
 
NOTE: If you do not have the full version of Microsoft Access 2007 installed on your computer, you can download and install the free Microsoft Office Access 2007 Runtime that will allow you to open and run the database.
{engine calculator screenshot}
CTDEEP calculator for determining criteria air pollutant, greenhouse gas and hazardous air pollutant emissions from stationary reciprocating internal combustion engines using AP-42 emission factors or manufacturer's data. This calculator will also calculate allowable emissions if your emergency engine operates under RCSA 22a-174-3b(e).
{CTDEEP Boiler Emissions Calculator}
CTDEEP calculator for determining criteria pollutant and hazardous air pollutant emissions from boilers using AP-42 emission factors or manufacturer's data.
{CO2 Equivalents Calculator}
CTDEEP calculator for calculating CO2 equivalents for various greenhouse gases (GHGs) using their respective global warming potentials and the expected mass emission rate of those various GHGs from a source.
{MASC Calculator Screenshot}
CTMASC (MS Excel)
 
CTDEEP calculator for determining HAP MASC compliance based on the calculation procedures in RCSA Section 22a-174-29.  A User Guide is included in the Excel file.
{Tanks Program Screenshot}
TANKS v4.09 (EPA Website)
 
TANKS is a Windows-based computer software program, developed by EPA, that estimates VOC and HAP emissions from fixed- and floating-roof storage tanks. TANKS is based on the emission estimation procedures from Chapter 7 EPA's AP-42.  A User Guide is available on the Tanks website linked above.
{LandGEM Screenshot}
LandGEM v3.02 (MS Excel)
 
LandGEM is an EPA model which provides a relatively simple approach to estimating landfill gas emissions.  LandGEM is based on a first-order decomposition rate equation for quantifying emissions from the decomposition of landfilled waste in MSW landfills.

   top
 
 
Fact Sheets and Forms
 
 
 
Emission Factor Links
 
If manufacturer’s data or stack test data is not available for your source, you may find relevant emission factors at one of the following sites to aid you in calculating emissions from your source.
WEBFIRE (fast access to EPA emission factors)
   top
 
 
Federal and State Regulation Links
State Regulation Links
 
Clean Air Act (CAA)
www.epa.gov/air/caa/
 
New Source Performance Standards (NSPS)
40 CFR Part 60 - NSPS (federal regulation)
TCEQ List of NSPS (links to fact sheets, flow diagrams, etc.)
 
National Emission Standards for Hazardous Air Pollutants (NESHAP)
40 CFR Part 63 - NESHAPs (federal regulation)
TCEQ List of NESHAPs (links to fact sheets, flow diagrams, etc.)
EPA NESHAP Website (EPA contacts for each NESHAP)
 
   top
 
 
Content Last Updated December 20, 2016